Blizzard-lighting Motif Fresco (Rev A) Bedienungsanleitung PDF herunterladen (Seite 12)

Page 12

Static Colors

1.) To use any of the built-in static colors, use the <MODE> button to scroll to Pr-01,

and hit <SETUP>. Use the <UP/DOWN> buttons to scroll through the static color

choices. Push the <SETUP> button to conrm your choice.

2.) Now you can adjust the strobe speed by selecting the strobe speed adjustment set-

tings of FS00 - FS99 (slow <--> fast).

Built-in Programs

1.) To set the xture to run a single built-in program, use the <MODE> button to scroll

to Pr--, and press the <SETUP> button. Then use the <UP/DOWN> buttons to scroll

through the built-in program choices of Pr02-Pr07 and push the <SETUP> button.

2.) Now you can adjust the speed of the program by using the <UP/DOWN> buttons

and choose from SP01 - SPFL (slow <--> fast), and push the <SETUP> button. To

conclude setup, you now have the option to adjust the strobe speed of the program by

selecting the strobe adjustment settings of FS00 - FS99 (slow <--> fast).

Auto Mode

1.) To set the xture to run in auto mode, use the <MODE> button to scroll to AUTO,

and hit <SETUP>.

Manual Color Adjustment:

Allowstheusertoadjustthecolorbalanceofthexture.Thesesettingsareglobal,they

willeffectallmodes.

1.) Use the <MODE> button to navigate to Colr and hit the <SETUP> button.

2.) From here, you can navigate to r255, 9255, or b255 and use the <UP/DOWN>

buttons to adjust the global intensity of red, green, or blue from 000-255.

Restore Factory Settings

1.) First, unplug the power to the xture so the xture is off.

2.) Press and hold down the <MODE> and <SETUP> buttons together.

3.) While still holding down the two buttons, plug the power back in. Data restoration

will initialize, resetting the unit back to its original factory settings.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Blizzard-lighting Motif Fresco (Rev A) Bedienungsanleitung Seite 12