Blizzard-lighting Weather System COB Bedienungsanleitung PDF herunterladen (Seite 13)

Page 13

Sound Active Mode:

1.) To use this xture in sound active mode, scroll to SU-- using the <MODE>

button. Then using the <UP/DOWN> buttons, choose the built-in sound active

chase pattern. Adjusting the settings from SU01 - SU31 will adjust the built-in

microphone sensitivity level (low <--> high).

Manual Color Adjustment:

Allows the user to adjust the color balance of the xture. These settings are global, they

will effect all modes.

1.) Use the <MODE> button to navigate to Colr and hit the <SETUP> button.

2.) Now you can navigate to r255, 9255, or b255 and use the <UP/DOWN>

buttons to adjust the global intensity of red, green, or blue from 000 - 255.

The Weather System COB™ Foot Switch Controller

Pedal 1 - Auto Run

When you step on pedal 1 on the foot controller, it will set your xtures to run in

auto mode. To step on petal 1 again from here, it will skip to the next program (2-

14), and then continue to run the programs in sequence from that point.

Pedal 2 - Sound Active

When you step on pedal 2 on the foot controller, it will set your xtures to run in

sound active mode. The built-in microphone sensitivity settings are adjustable from

the LED control panel menu.

Pedal 3 - Freeze

When you step on pedal 3 on the foot controller, it will freeze/suspend the currently

running program. Step on pedal 3 again, and the Weather System COB™ will con-

tinue running the suspended program.

Pedal 4 - Blackout

When you step on pedal 4 on the foot controller, it will blackout the currently run-

ning program. Step on pedal 4 again, and the Weather System COB™ will continue

running the program where it left off.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Blizzard-lighting Weather System COB Bedienungsanleitung Seite 13