Blizzard-lighting EM-Pulse LED Strobe Fixture Bedienungsanleitung PDF herunterladen (Seite 12)

Page 12

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

Set the Starting DMX Address:

The default mode for the xture is DMX, so the rst menu item that you can edit is

the starting DMX address.

1.) Press the <UP/DOWN> buttons until you reach Address.

2.) Push the <ENTER> button.

3.) Use the <UP/DOWN> buttons to select a channel from 001-512.

4.) Press the <ENTER> button to conrm.

5.) Press the <ESC> button to return to the main menu.

Select the DMX Channel Mode:

1.) Press the <UP/DOWN> buttons until you reach Cong.

2.) Push the <ENTER> button.

3.) Using the <UP/DOWN> buttons, highlight DMX Mode, then press <ENTER>.

4.) Use the <UP/DOWN> buttons to select 1, 3, 4, 6, 7, 16, or 3/9 pixel modes.

5.) Press <ENTER>, and then press the <ESC> button until you reach the

Address screen.

Master/Slave Mode:

1.) Disconnect xture(s) from any DMX signal source.

2.) Set each xture to matching DMX modes.

3.) Connect all xtures together via DMX. The rst xture in the DMX chain will be

the master, followed by the slave xtures.

4.) Connect DMX controller to the master unit for DMX control.

Load Default Settings:

1.) Press the <UP/DOWN> buttons until you reach Load Default.

2.) Push the <ENTER> button.

Auto & Standalone Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable

speeds.

Auto Mode:

1.) Press the <UP/DOWN> buttons until you reach Auto.

2.) Push the <ENTER> button.

3.) Use the <UP/DOWN> buttons to select from Mode 1 to Mode 5.

4.) Press the <ENTER> button to conrm.

Auto Program Speed:

1.) Press the <UP/DOWN> buttons until you reach Speed.

2.) Push the <ENTER> button.

3.) Use the <UP/DOWN> buttons to select from 000-031.

4.) Press the <ENTER> button to conrm.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Blizzard-lighting EM-Pulse LED Strobe Fixture Bedienungsanleitung Seite 12